The presses for automotive are made from 1.000 kN to 50.000 kN (100 Ton to 5.000 Ton) for sheet metal stamping, heat shield molding, SMC, RTM and PCM, Forged carbon, composite materials that need molds with high temperatures 160 ° -250 °. All presses are equipped on request with mold loading and unloading, with the possibility of installing an automatic bolster for mold change, lower and upper blank holder.
Gasket presses are machines made with different tonnage, from 1,000 KN to 50,000 KN, aimed at industrial sectors such as the chemical and oil sectors. . These gasket presses can be equipped with automatic bolster for mold change, hot plates, vacuum bell and central and side extractors. They can also be equipped with an intermediate floor that allows for double production. Gasket presses include PTFE, FILLED PTFE, PEEK, MELAMINE, POM, SMC GLASS FIBER, SMC CARBON FIBER molding. It is also foreseen the molding of special gaskets, inserts for ball valves, sealing rings, phenolic and urea materials, etc …
The presses for the calibration of pipes have dimensions from 10,000 kN to 50,000 kN. The function of these presses is to calibrate welded tubes, cold formed and obtained from sheet metal, which can be in carbon steel, stainless steel, duplex, super duplex and chromium steel. The pipes are used in oil & gas plants. The dimensions of the presses vary according to the size of the tubes to be processed: from 8 ”to 72” with a diameter of 1,828.8 mm. The presses for pipe calibration can have an automatic system with advance shuttle during the pipe calibration process. It is possible to install an automatic system for changing the mold. We manufacture sizing presses for stainless steel, X70, Duplex, Superduplex pipes up to 70 mm thick.
The presses for stamping sheet metal are made on tonnages from 2,000 kN to 50,000 kN and are used for sheet metal deformation, pre-bending and bending. The sheet metal can be of various materials, not only iron, but also carbon steel, stainless steel, duplex, super duplex and chromium steel. It is possible to install an automatic mold change system, lower and upper blank holder and automatic blocking of the molds. The presses meet fundamental criteria such as sturdiness, precision and finish. We also produce “yawn” mold testing presses.
The deep drawing presses are made for tonnages from 2,000 kN to 50,000 kN with the possibility of installing an automatic bolster for mold change, lower and upper blank holder. The deep drawing presses are made with high quality software able to manage the lower and upper blank holder and the re-drawing and deep drawing system from the bottom with lower and upper extractor, with a system of shock absorbers for sheet metal shearing, which allow to deform the sheet and obtain objects of various shapes.
The presses for SMC – SMC CARBON – RTM – PCM and FORGED CARBON are used for the automotive and solar energy sector. We manufacture such presses up to 50,000 kN (5,000 Ton). We can also integrate in these presses the power system for the electric heating of the molds, including the automatic control of the temperatures in various areas of the mold and with powers of various Kw.
Forging presses first process hot, temperature, and high-speed material to allow for the forging of a piece of steel. The forging press can reach 120 – 140 cycles per minute. It is manufactured for tonnages from 10,000 kN to 50,000 kN (1000 Ton to 5000 Ton).
